Support for your
Dyson V8 Absolute™ vacuum.

Toggle between Powerful mode – for longer suction – and MAX mode, for stronger suction. Just hold down the trigger and slide the control back and forth.

The quick-release tools click into place, and release in moments by simply depressing the release switch.

To maintain suction, keep an eye on the bin and empty it as soon as debris reaches the MAX marker.

Leave at least 1.2m between the floor and the lowest screw point. Make sure it's within easy reach of a power socket so the cable has some slack.

Rinse under a cold tap until the water runs clear – you don't need any detergents. Squeeze out excess water and leave to dry on its side (at least 24 hours) before refitting.

Remove the wand and connect your chosen tool directly to the inlet pipe to use the vacuum as a handheld.